MAC TOOLS MW250 Instruções de Operação descarregar pdf (Página 224)

100

101

TM 5-4310-452-14

4-84. COMPRESSOR OIL FILTER ELEMENT REPLACEMENT.

THIS TASK COVERS

a. Removal b. Installation

INITIAL SETUP

Equipment Conditions: Materials/Parts:

• Engine off. • Lubricating oil (Item 9, Appendix E)

• Air pressure relieved. • One oil filter element

• Right door assembly open.

References:

Tools/Test Equipment: • LO 5-4310-452-12

• General mechanic's tool kit

a. REMOVAL

1. Remove compressor oil filter element (3) and gasket (2) from filter head (1). Discard oil filter element and

gasket.

b. INSTALLATION

1. Apply a thin coat of lubricating oil on new gasket

(2).

2. Install new oil filter element (3) and gasket (2)

on filter head (1) until gasket contacts filter

head, then tighten 3/4-turn more.

3. Check compressor oil level in sight gage and fill

if necessary (see LO 5-4310-452-12).

4. Start engine and check oil filter element (3) for

leaks (see paragraph 2-12).

TA 505531

FOLLOW-ON TASKS:

• Close right door assembly.

4-167

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 404 405

Comentários a estes Manuais

Sem comentários

MAC TOOLS MW250 Instruções de Operação Página 224

Comentários a estes Manuais

Manuais e produtos relacionados com Sistema de solda MAC TOOLS MW250