MAC TOOLS MW250 Instruções de Operação descarregar pdf (Página 253)

100

101

TM 5-4310-452-14

4-97. AIR INLET HOSE REPLACEMENT.

THIS TASK COVERS

a. Removal b. Installation

INITIAL SETUP

Equipment Conditions: Materials/Parts:

• Engine off. • Eight lockwashers

• Air pressure relieved. • Two preformed packings

• Right door assembly open.

• Front end panel assembly removed (see para- Tools/Test Equipment:

graph 4-82). • General mechanic's tool kit

a. REMOVAL

NOTE

Air inlet hose may contain oil. Use a suitable container to catch excess oil.

1. Remove 4 capscrews (6), lockwashers (5), pipe

flanges (4), and air inlet hose (1) from oil

separator (3). Discard lockwashers.

2. Remove 4 capscrews (9), lockwashers (10), pipe flanges (8), and air inlet hose (1) from air compressor (7).

Discard lockwashers.

3. Remove 2 preformed packings (2) from ends of air inlet hose (1). Discard preformed packings.

b. INSTALLATION

1. Install 2 new preformed packings (2) in air inlet hose (1).

2. Position air inlet hose (1) in place on compressor (7) and oil separator (3).

TA505548

4-196

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 404 405

Comentários a estes Manuais

Sem comentários

MAC TOOLS MW250 Instruções de Operação Página 253

Comentários a estes Manuais

Manuais e produtos relacionados com Sistema de solda MAC TOOLS MW250