MAC TOOLS MW250 Instruções de Operação descarregar pdf (Página 43)

100

101

TM 5-4310-452-14

2-12. STARTING UNDER USUAL CONDITIONS (Con't).

CAUTION

Do not operate the compressor unit more than 15° out-of-level, either end-to-end or side-to-side.

If the unit is not level, the engine oil will not circulate correctly and may result in severe engine

damage.

b. Raise or lower front leveling jack (3) until compressor unit (2) is within 15° of level, end-to-end. If compressor

unit is not within 15° of level, side-to-side, move compressor unit to a more suitable site.

WARNING

Slowly open manual blowdown

valve, being careful to keep face and

any bare skin away from valve

opening. If this warning is not

followed, injury to personnel may

result.

c. Open manual blowdown valve (4) to

ensure that pressure is relieved from oil

separator system. Close manual blowdown

valve after relieving pressure.

2-16

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 404 405

Comentários a estes Manuais

Sem comentários

MAC TOOLS MW250 Instruções de Operação Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Sistema de solda MAC TOOLS MW250